5
Taifun
GT one
®
INSERT COTTON
Cut a suitable cotton strip to size.
Carefully guide it through the coil.
The ends of the cotton are trimmed and positioned
in front of the side openings for liquid flow.
FILLING THE TANK
To fill the device, it must first be turned upside down.
Now carefully unscrew the tank section from the base,
so that no remaining liquid is spilled.
Hold the tank at a slight angle at the beginning. Carefully fill the
liquid into the tank along the edge. During filling, slightly raise the
tank again so that you can see the filling level. Stop filling as soon as
the liquid level reaches the top edge of the bell.
Now screw the base back on.
WARNING
• Make sure to fill the liquid at the edge of the tank next to the bell. No liquid should get into the air opening of the bell.
• Always make sure that the tank is sufficiently filled to avoid dry vaporization.
• Make sure that no liquid gets on your skin, otherwise wash these areas thoroughly.
!
