6
4. Commissioning
4.1 Selecting the location
The location must be
¾
free from vibrations and shocks,
¾
free from dusty or polluted air,
¾
a non-flammable place or surrounding,
¾
well-ventilated with haze-free air,
¾
have an ambient operating temperature b5°C and +45°C and
¾
a relative humidity below 80%.
4.2 Installing and Changing the Fluidbottle
¾
Disconnect the fluid tube from the lid by retracting the collar and removing the
attachable coupling.
¾
Unscrew the canister lid of the empty container and screw it onto the new
container.
¾
Push the attachable coupling into the collar, until you hear a click. Insert the new
canister in a proper position.
4.3 Fogfluid
To guarantee trouble-free operation the special S
MOKE
F
ACTORY
fluid must be used.
Use of other liquids will lead to clogging an void the manufacturer‘s warranty.
Don’t use fluid older than five years.
Fog fluid cannot be stored for an indefinite period of time.
If you wish more information about fluids, don’t hesitate to contact us or your local
specialist dealer.
4.4 Power Connection of the Tour Hazer II
Connect the power plug to a safety contact electrical outlet
(
DIN 49440/441).
Make sure the outlet has the correct voltage for your machine. (230V/50Hz).
A „P“ and two figures appear on the LED display (for instance
P 15
).
After approximately 60 sec. the Tour Hazer II is heated up and ready to
be used. Press the Enter-button once (14) to start hazing. The green
Active-LED (1) will light up. After a short interruption the hazing will
begin. After another 30 sec the display dims itself automatically, but can
be reactivated immediately by pressing any button.
Fog fluid
Fig. 5: Adjusting the performance of the fog
generator
