SMK A-2, User Manual

Page: 5 / 6

an incoming call: press the control button (1B or
6A) twice, as soon as you hear the acoustic
signal for an incoming call Redialling : press the
control button (1B or 6A) twice. This depends
on the features and configuration of your mobile
phone. • Keep the SMK A-2 out of the reach of children.
Adjusting the volume
• Keep the SMK A-2 in a dry place. Humidity and
condensation may damage the electronic
circuits.
• Avoid exposing the device to extreme
temperatures. Intense cold may create
condensation inside the components as these
warm up. Extreme heat may damage the
battery, circuits or casings.
• Do not drop, hit or bend the components as the
internal circuits may become damaged.
• Do not paint or decorate the SMK A-2 as the
casings may become damaged or impede
correct operation.
• Do not use chemical products, solvents or
detergents to clean the SMK A-2 as these may
damage the device.
If you cannot connect your SMK A-2 device to
your mobile phone :
• Make sure the SMK A-2 is switched on
• Make sure your mobile phone is switched on
and Bluetooth has been turned on
• Make sure both devices are paired
• Make sure the SMK A-2 device and your
mobile phone are not more than 10 metres (32
ft.) apart If, after this, you’re still not able to pair
or use the SMK A-2 with your mobile phone,
please contact the retailer where you purchased
the product.
Troubleshooting
Shortcuts
The SMK A-2 device allows you to receive calls
automatically (as long as this feature is
supported by your mobile phone). To do this,
The SMK A-2 device is pre-programmed with a
volume level that allows for optimal listening at
speeds of up to 80 km/h (50 mph). To adjust the
volume, use the volume control on the
connected device. SMK A-2 bluetooth is pre-
programmed for 3 different levels of volume.
pressing the button 6B will change the volume to
the next level automatically. Volume perception
may vary depending on the position and
separation of the speakers from your ears, as
well as the type of helmet and motorcycle,
external conditions and other factors.
Technical Specifications
Bluetooth : 2.1 Class 2
Profiles : A2DP, HSP, HFP, EDR
Battery : Lithium polymer, allowing for up to 7
hours of talk time and 200 hours of standby time
(depending on use and configuration of the
device)
Care and maintenance
The SMK A-2 device uses components with the
latest technology and is manufactured to high
s t a n d a r d s . To k e e p y o u r d e v i c e f r o m
inadvertently becoming damaged, please read
the following recommendations carefully :
• Do not attempt to open any of the system
components, since the electronic parts inside it
may become damaged. Do not attempt to open
or change the battery as it may be dangerous.
6