SMK A-2 INSTRUCTION MANUAL
Congratulations and thank you for purchasing a
SMK A-2 device. This Bluetooth device has
been especially designed to keep you
connected to your phone and listen to your
favourite music while travelling on your scooter
or motorcycle.
The SMK A-2 system is compatible with all
Bluetooth devices that transmit audio (mobile
phones, smartphones, GPS navigators and
other devices) using the profiles specified in the
manual. This device is wholly integrated into
your helmet. It can be operated and paired
easily through a single control button (1B or 6A).
A single red/blue LED indicator (6C) serves to
display connection status, pairing, battery
charging and low battery. Use of the SMK A-2
device, please read this manual and keep it in a
safe place.
Welcome
Charging the SMK A-2
Before using your SMK A-2 device for the first
time, you must charge the device completely.
Connect the terminal (6D) to the provided USB
cable (5) and then connect the cable to a USB
charging port. While charging, the red LED light
will switch on (6C) and it will switch off once
charging has been completed.
NOTE : Don’t pull off the cable to disconnect it
from the USB port. NOTE : As time goes by,
batteries gradually lose their charge. This is why
it’s important to charge the battery fully before
using the device and allow the battery to use
almost all of it’s charge in between charging
cycles.
WARNING :
If you plan to store your SMK device for a long
period of time, be sure to recharge it at least
To use the SMK A-2, it’s necessary to pair it to
the Bluetooth device you wish to connect it to
(mobile phone, GPS navigator). While the
device is switched off, hold the control button
(1B or 6A) until the LED indicator (6C) begins
flashing in Red and Blue. The mobile phone or
GPS navigator will find the device under the
name SMK A-2. Select the SMK A-2 device and
it will pair automatically.
NOTE : Pairing is a process that only needs to
be completed once. When the SMK A-2 is
paired to a specific device, both devices will
connect automatically when switched off and
on.
Linking/Pairing
Switching ON/OFF
Switching on: press and hold the button (1B or
6A) for a few seconds until the speaker provides
an acoustic signal and the LED indicator (6C)
begins to flash in Blue.
Switching off: press and hold the control button
(1B or 6A) for a few seconds until the speaker
provides an acoustic signal and the LED
indicator (6C) begins flashing in red before the
device powers off.
Call Functions
When there is an incoming call, the speaker will
provide an acoustic signal. Answering by
pressing the button (1B or 6A) : press the control
button (1B or 6A) only once Answering through
a voice command: answer the call by speaking
any word out loud (e.g. “Answer!”) Ending a call:
press the control button (1B or 6A) only once or
wait until the other person hangs up. Rejecting
EN
once every six months to ensure perfect battery
function.
5
Summary of Contents for A-2
Page 1: ......
Page 2: ...USER MANUAL FOR SMK A2 BLUETOOTH HEADSET 3 ...
