C A U T I O N
DO NOT ATTEMPT TO SERVICE THE UNIT BY REMOVING
THE COVER. REMOVAL OF THE UNIT COVER WILL VOID
THE WARRANTY. CALL THE SERVICE CENTER.
SMK Industries warrants this product to be free from
material or workmanship defects for a period of 60 days
from the date of manufacture. Alternatively, 60 days from
purchase, not to exceed two years from date of
manufacture.
Warranty does not apply when:
•
Unit is not used within the guidelines of this
manual.
•
Product or Parts are used or installed outside
the SMK authorized service center.
•
Incompatible fluids are used.
•
Misuse or Abuse.
•
Improper or inadequate cleaning of unit after
use.
In the event you need to utilize this warranty, the product or
part must be returned for examination, postage prepaid,
direct to the SMK Industries service center as instructed by
calling 515-202-0052. Proof of purchase date and an
explanation of the claim must accompany the
merchandise. If inspection discloses a defect, SMK will
either repair or replace the product with like equipment at
SMK’s expense. If no defect is found during the inspection,
or if the defect resulted from causes not within the scope of
SMK’s limited warranty, then the user must assume all
costs incurred returning and/or storing the product.
All products and parts will be tested using SMK testing
criteria. Units found to be damaged, altered or otherwise
mistreated will not be covered under this warranty. Units
found not to be defective are subject to charges to be paid
by the returnee.
Page 5
Clean up
C A U T I O N
As with any type of sprayer, this unit will not function
satisfactorily if the unit is not clean. Thoroughly clean the
sprayer after EACH use by completely flushing the unit,
including all hoses and wand. The cleaning agent should be
whatever is recommended by the manufacturer of the material
that you are spraying. Pump the cleaning agent through the
sprayer until all traces of the previously sprayed material has
been removed from the unit.
Page 10
Operating the Sprayer
