Page
the built-in native driver. You don’t need to do anything while
your computer is going through the installation of a new device.
Power on the presenter by sliding the on/off switch
to ON position.
The radio frequency (RF) codes
are factory preset for your
convenience; the presenter should
be functional at this point.
If for any reason the presenter
does not function correctly, i.e.
the presentation slides do not
advance to the next page, there
may be other wireless devices in
the vicinity operating in the same
radio frequency channel. The
presenter can easily be reset to another channel by pressing once
on the USB receiver dongle’s connect button while it’s plugged
in to the computer’s USB port, followed by pressing once on
•
•
•
Power switch on
the presenter
Summary of Contents for RemotePoint VP4550
Page 1: ...VP4550 ...
Page 16: ......
