Page
0
Operating Tips &
Trouble Shooting
Make sure the presenter is turned on by checking the on/off
switch located at the side of the presenter before using it.
Conserve the battery power by switching the on/off
switch to “OFF” position while traveling. If you will not
use the presenter for a long period of time remove
the batteries from the battery compartment.
When the laser beam becomes dim it may be due to low
battery power. Replace with 2 fresh batteries to ensure
continuous presentation without power disruption.
The presenter stays connected to your computer even when it’s
turned off. If for any reason the connection to the system is lost
or interference is detected (erratic slide control), first check if
the micro USB receiver dongle is plugged into the computer’s
USB port, then verify that the presenter is within the range (up
to 70 feet) from your computer. If the connection is lost it can
•
•
•
•
Summary of Contents for RemotePoint VP4550
Page 1: ...VP4550 ...
Page 16: ......