To place your order: 1-800-643-9378 | www.midwestvetsupply.com
Contact your Midwest Veterinary Supply Representative for more information!
Advisor
®
Tech Vital Signs Monitor
4
Inserting the Battery into the Monitor
1.
Open the battery cover on the left side panel
2.
Insert battery (provided) and ensure it is aligned correctly
3.
Use lever to hold battery in place
4.
Close battery cover
OUT OF BOX SET UP
Plugging into a Main Power Source
1.
Insert power lead into AC input at the rear panel
2.
Plug into a main power source
Turning the Power On
1.
Press and hold the
power switch
on the front panel
2.
When the power indicator is bright, the display screen will enter the main screen
after 25 seconds
Connecting Required Sensors
(Refer to visual reference below)
1.
Align correlated sensors to the sockets on the left panel of the monitor and connect
them (correlated by color)
2.
Listen for a click when inserting the sensors
Connecting Required Sensors
When removing a sensor from the
monitor, make sure you pull back its’
sleeve for correct removal
Pull Sleeve Back
Inserting the Battery
into the Monitor
1
2
3
4
