Smiths Medical BCI SPECTRO2 10, Operation Manual

Page: 76 / 83

Appendix A: Guidance and Manufacturer’s Declaration
Clinician’s Operation Manual A-1
Appendix A: Guidance and Manufacturer’s Declaration
Guidance and Manufacturer’s Declaration
The WW1000/WW1020 pulse oximeter is intended for use in the electromagnetic environment
specified in the tables within this appendix.
NOTE! The WW1000/WW1020 pulse oximeter system must be put into service according to
the provided EMC information to ensure proper operation.
Electromagnetic Emissions - Emissions Test
GUIDANCE AND MANUFACTURER’S DECLARATION – ELECTROMAGNETIC EMISSIONS
The WW1000/WW1020 pulse oximeter is intended for use in the electromagnetic environment
specified below. The customer or end user of the WW1000/WW1020 pulse oximeter should
ensure that it is used in such an environment.
EMISSIONS TEST COMPLIANCE
ELECTROMAGNETIC ENVIRONMENT
GUIDANCE
RF emissions
CISPR 11
Group 1 The WW1000/WW1020 pulse oximeter uses
RF energy only for its internal function.
Therefore, its RF emissions are very low and
are not likely to cause any interference in
nearby electronic equipment.
RF emissions
CISPR 11
Class B The WW1000/WW1020 pulse oximeter
is suitable for use in all establishments,
including domestic establishments and those
directly connected to the public low-voltage
power supply network that supplies buildings
used for domestic purposes.
Harmonic emissions IEC
61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies