3
Installation
1.
Release the outer casing by
removing the screws on the
underside of the casing.
2.
Secure the heater to the wall
using fixings suitable for the wall
type. Ensure the chassis is flat
to the wall and level. If
necessary
use
packing
to
compensate for an uneven wall
surface. Maximum recommended
installation height is 2.1 metres
to the underside of the heater.
3.
Connect the heating system flow
and return pipes to the heater
pipe work. Do not use soldered
fittings to the heater pipe work
as the heat generated could
damage internal wiring
and
components. We recommend the
use of full flow service valves.
The valves should be accessible
after
completion
of
the
installation. Check for water
leaks. Vent any trapped air from
the heating system.
