3
Introduction
SPECIFICATIONS FOR SWEEP STAR 48 HIGH LIFT
WEIGHTS AND DIMENSIONS
HIGH LIFT
Length
121" (307 cm)
Width
60" (153 cm)
Height with Hopper Down
63" (160 cm)
Height with Hopper Up
126" (320 cm)
Wheel Base
70" (179 cm)
Weight
1800 lbs(818 kg)
SOUND LEVEL (DBA)
At ear level
90 dba
At 3 ft (0.914 m)
91 dba
At 30 ft (9.14 m)
76 dba
ENGINE
Make
Kohler
Model#
CH25
Type / Spec#
CH730-0100
Horsepower
25 Hp (18.6 kw)
Fuel
Unleaded 87 Octane
Gasoline Minimum
Cooling System
Air Cooled
Lubrication System
Full Pressure
Alternator
15 Amp
WHEELS & TIRE
Front: One 18 x 9.50 x 8 Multi-rib
Rear: Two 24 x 12.00 x 12 NHS (20 psi max)
Castor: 9 x 3.50 - 4
BRAKES
Dynamic Through Hydrostat
PARK BRAKE
Hand Operated Lever, Discs on Rear Axle
SPEED
Forward Speed
0 to10 mph (0-16kph)
Reverse Speed
0 to 4 mph (0-6 kph)
BATTERY
12 Volt Automotive IBS type 45-50
Cold Cranking Amps
48 minimum
Ground Terminal Polarity
Negative (-)
Maximum Length
9" (23cm)
Maximum Width
5.38" (14cm)
Maximum Height
9" (23cm)
FLUID CAPACITY
Crankcase Oil
See Engine Manual
Fuel
5 gallon (19 liters)
Hydraulic Fluid
5 gallon (19 liters)
Grade of Hydraulic Fluid
SAE 10W-40 API Service SG Motor Oil
OPTIONAL EQUIPMENT
48-084
48" Brush Reel Kit (includes pillow blocks and pulley drive)
48-085
48" Finger Reel Kit (includes pillow blocks and pulley drive)
48-120
Dust and Filtration pack - High lift
Summary of Contents for 48-000-C
