Smithco 17-500, Parts & Service

Page: 77 / 98

75
Accessories
For 15-493 Boom
10-300 Boom
17-503-Boom
17-834 HOSE REEL MOUNT DRAWING
REF# PART# DESCRIPTION QUFANTITY
1 HB-38-16-350 Bolt 3 /
8
- 16 x 3 1 /
2
2
HNTL-38-16 Lock Nut 3 /
8
- 16 2
2 14-325 Boom Carrier (part of machine) 2
3 10-221 Hose Reel Mount 1
4 16-906 Electric Hose Reel 1
16-129 Manual Hose Reel 1
5 18-249 Brass Fitting 3 /
4
MPT x 3 /
4
HB 1
6 HB-516-18-150 Bolt 5 /
16
- 18 x 1 1 /
2
4
HNTL-516-18 Lock Nut 5 /
16
- 18 4
7 HB-38-16-250 Bolt 3 /
8
- 16 x 2 1 /
2
2
HNTL-38-16 Lock Nut 3 /
8
- 16 2
8 16-295 Hose Fitting 1
1. Wear protective clothing when draining the tank and taking apart the lines.
2. Drain tank and spray system in a safe and approved method insuring that no chemical or water remain in
tank as you will be taking apart lines.
3. Remove key from ignition, set park brake and block wheels.
4. Remove square rubber covers on boom carriers.
5. Place hose reel bracket inside the boom carrier tube on left side and outside on right side with arms
pointing toward front of machine.
6. Lower bracket until top hole in bracket lines up with hole in upright. Bolt as shown.
7. Put hose reel on hose reel bracket with fitting on left side of machine. Use four bolts
5
/
16
- 18 x 1
1
/
2
and four
5
/
16
- 18 lock nuts to hold in place. Tighten bolts.
8. Put 18-249 barb fitting into hose reel.