Smith Newton 2000 Series, Owner'S Manual

Page: 39 / 40

© 2012 Smith Electric Vehicles CD-0650-0018r0
Page | 39
Are the 24V Voltage Isolator
switches ON and the Battery Pod
MSDs installed?
Check 24V Isolator
Switches Refer to
Figure 5.1
Install MSDs,
Refer to Figure 5.2
Are the two 12 Volt Start Batteries
Charged over 11 Volt?
Has the Key Switch been turned to
the ON position?
Is the High Voltage Isolator Reset?
Charge the Battery,
Refer to Section 5
Vehicle Has No Power
Select appropriate
position, Refer to
Figure 7.1
Reset HV Isolator,
Refer to Figure 2.1
NO
NO
YES
NO
YES
YES
NO YES
If further advice is
required, consult a
Smith Electric Vehicles
Technician
www.smithelectric.com
1-888-788-3144
Or email
Service_NorthAmerica@
smithelectric.com