4. Setting the temperature
The water heater can simultaneously display the actual temperature and preset temperature. The
actual temperature is the actual temperature of the water heater and the preset temperature is the
temperature the user would like the water to be heated to.
Press the “
” the “
” buttons to adjust the preset temperature. Holding down the adjustment buttons
will cause the temperature to increase or decrease continually. The preset temperature can be set
between 35°C to 75°C.
3. Setting the clock
Ensure the indicator lights for ‘Timer 1’ and ‘Timer 2’ are off. Hold down the ‘Program’ button for 3
seconds till the time on the screen flashes. Press the “
” the “
” buttons to set the hour, then press
the ‘Program’ button again to confirm the hour. At this point, use the “
” and“
” buttons to set the
minute. Holding down the adjustment buttons will cause the digits to increase or decrease continually.
Press the ‘Program’ button to confirm the minute. At any point after 10 seconds of inactivity, the
system will exit setting mode and the time at that point will be saved.
15
Fig. 11
Fig. 12
Fig. 13
