3. Using previously assembled components install item #A-4 and #A-5 using 4x fastener
#13-3, do not fully tighten, install item #B-2 using 3x fastener #13-1 note to
orientation of #B-2, do not fully tighten.
4. Position Panel B as shown, centering the panel to create equal gaps, a spacer or credit
card works well. Fasten panel B to item #A-1 using 7x fasteners item #13-1 using the
supplied T25 Torx bit item # 13-4. NOTE: The panel should sit on the metal finger as
shown in detail.
Optional: Use 1x
fastener #13-1 to
hold #A-3 in place.
This fastener will be
removed on step 10
REVISED: 3/29/2022
Document #: 179719
Assembly Instructions
