01/2018
Form# 179773
www.smithsystem.com
4
Step 3: Attach the cable.
Take the loose end of the cable and set it flush against the pilot hole on the leg.
Using a Phillips head screwdriver, or an electric screwdriver, attach the eyehole
of the cable with the (1) Sheet Metal Screw enclosed with pencil retainer.
Step 4: Optional: Adjust the legs.
Legs are set to a standard height upon arrival. If you require a different height,
use the allen wrench to loosen the dog screws. Set the leg stem to the desired
height, and re-tighten the dog screws.
