1. Place wood top on clean smooth surface upside down with the pilot holes facing up,
fasten 2x item #A-7 to item A using 4x fasteners item #13-1 using the supplied T25
Torx bit item #13-4.
2. Slide the previously assembled panel A onto item #A-3, item #A-7 should side over
the metal lip of item #A-3 as shown. Do not install any fasteners at this point this
board will be removed later. It is helpful to clamp panel A to item #A-3.
REVISED: 2/2022
Document #: 179719
Assembly Instructions
