2009 Booktruck Shelf Assembly Instructions
Step 1: Locate your Booktruck Shelf and your Booktruck shelf leg set. Begin by turning the Booktruck Shelf
laminate side down on a clean, dry surface. Place (ea) one of your riser legs on the Shelf and line up
the pre-drilled holes to the booktruck shelf leg. Attach the Booktruck shelf leg using the supplied wood
screws and a phillips #2 bit. (Repeat this step with all 4 Riser Legs).
Form #179947
Page 3 of 3
Rev. 05/2009
Step 2: With your Booktruck Shelf Assembled, it is now time to attach the legs to your Booktruck.
Step 3: Loosen and remove the bolt from each Riser Leg in order to slide the leg clamp around the booktruck
handle. With the bolts removed, slide the legs over the booktruck handles and re-assemble each of the
4 Riser Legs. Once all legs are tightened into place, your Booktruck Shelf is ready for use.
