5
6
smithandnoble .com
800.248.8888
STEP 2 — ATTACHING YOUR BRACKETS
Attaching the Brackets
Note the ordered width of your valance .
Extend a tape measure out to this
dimension. Center over the window,
and place a mark at zero and the width
dimension . Place the outside edge of
each mounting bracket at the desired
height and on these marks . Attach with
the screws provided . Center support is
included with wider valances only .
STEP 3 — ATTACHING THE VALANCE TO THE ROD
Attaching the Valance
to the Rod
Start at one end of the rod . Insert the
rod into the pocket in the top of the
valance . Slide the valance completely
onto the rod .
STEP 4 — MOUNTING THE ROD AND VALANCE
Mounting the Rod
and Valance
Engage the holes in the top of the rod
onto the post on the brackets . Lower
the rod down onto the brackets to
lock into place .
For valances with a center support
bracket feed bracket through pre-slit
button hole to cradle the rod .
Parts & Tools
FABRIC VALANCE
Rod Mounted
Care & Cleaning
Minimal care and cleaning is needed to maintain the beauty of your valance .
Occasional light vacuuming with a soft bristle attachment or gentle feather dusting is all
that is required to keep your valance looking fresh and neat.
CARE & CLEANING
Parts & Tools
FABRIC VALANCE
Rod Mounted
SUPPORT
BRACKET
BACK SIDE OF VALANCE
