3
4
smithandnoble.com
800.248.8888
Getting Started
PENCIL & SCREWDRIVER (NOT INCLUDED)
POWER DRILL & LEVEL (NOT INCLUDED)
SCREWS
STEP 1 — PARTS & TOOLS
WALLBOARD OR PLASTER:
Hollow wall applications: Use a secure fastener designed
specifically for this purpose.
METAL:
Prepare by pre-drilling holes and then using the included screws .
CONCRETE, STONE, BRICK OR TILE:
Use a masonry drill and surface-specific plugs, anchors, or
screws. When selecting a fastener be sure it’s designed to support the weight of the product being
installed (if you’re not sure, either give us a call or ask a professional at your local hardware store).
Once obtained, follow the fastener manufacturer’s instructions regarding proper installation.
TOOLS YOU WILL NEED TO INSTALL YOUR HARDWARE:
Pencil, screwdriver, ¼" nut driver,
level, and a drill with a
7
⁄
64
" drill bit.
Note: It’s important to monitor the amount of pressure you apply when using a drill. If the screws
are too tight this may cause the screw itself to break off in the wall or window frame.
MOLLY
BOLT
SELF DRILLING
ANCHOR
TOGGLE
BOLT
Before you begin, check the accompanying diagram to make sure you have all the parts you need .
You’ll need to make sure the surface you intend to install your hardware is sturdy enough to
accommodate the brackets. If you’re screwing
directly into a surface this means locating wood
studs that are strong enough to securely bond
with the included screws. Otherwise, you’ll
need to use a secure fastener (as illustrated) but
please note this piece is not included .
MOUNTING & SUPPORT BRACKETS
Parts & Tools
FABRIC VALANCE
Rod Mounted
MOUNTING
BRACKET
Standard Valance
OVERVIEW
MOUNTING
BRACKET
SUPPORT
BRACKET
Parts & Tools
FABRIC VALANCE
Rod Mounted