7
8
smithandnoble.com
800.248.8888
STEP 5 - ATTACHING BRACKET TO THE ROD
STEP 4 - PLACING CARRIERS & END STOPS
Adding or Removing Carriers
to the Rod
Your track rods will come with all master
carriers and regular carriers pre-installed.
If you need to add or take out some
carriers depending on your drapery,
unscrew the 90 degree corner bracket or
elbow from the rod.
Remove the carrier & end stop and either
add or take out the carriers needed.
Placing End Stop on the Rod
SPLIT DRAPERY (A)
Once all carriers have been placed in the
track, for split drapery, place end stop in
between the first carrier from each end
and the second carrier so end of drape
does not move when drape is closed.
ONE WAY DRAW DRAPERY (B)
For one way draw drapery, place end
stop in between the first carrier from
the end and the second carrier of the
side you won’t be opening it from, so
the end of drape does not move when
drape is closed.
ROD
CORNER
BRACKET
B) One Way Draw
End stop & Carrier positions
A) Split Draw
End stop & Carrier positions
END
STOP
CARRIERS
CEILING BRACKET
SPLICE
COVER
SPLICE
CONNECTOR
SPLICE
HEX
SCREW
CEILING
BRACKET
MOUNTING
POST
Insert the ceiling brackets into the
channel in the back of the rod. Do not
tighten at this time.
If your rod was spliced, attach the
center spliced bracket by taking off the
little metal plate and screwing it in the
middle hole of the splice connector.
CHANNEL
CEILING
BRACKET
CHANNEL
MOUNTING
POST
Use Splice Connector
if rod is spliced.
SPLICE CENTER
BRACKET
END STOP
CARRIERS
