11
12
smithandnoble.com
800.248.8888
ACCESSORIES
ACCESSORIES
Tiebacks (optional)
BALL TIEBACK
STEP 1
In order to locate where to install your
tiebacks, measure the height of the
window and divide this by two. Using
the previous calculation, mark that
spot on the wall with a pencil.
To ensure you like the way the panel
drapes, gather one side and sweep
it over to the approximate proposed
location. Once you’re sure the tieback
is in the perfect location, use your
pencil to mark the spot to install it.
Measure the distance from the
bottom or top of the window to the
tieback to mark the other side and
ensure they’re even.
Now hold the tieback hardware on
the wall at the desired location and
rest a level above it, adjusting it until
it’s straight.
STEP 2:
Place tieback level against wall in
desired locations and attach to the wall.
Hold Back (optional)
STEP 1
In order to locate where to install your
tiebacks, measure the height of the
window and divide this by two.
Using the previous calculation, mark
that spot on the wall with a pencil.
To ensure you like the way the panel
drapes, gather one side and sweep it
over to the approximate proposed lo-
cation. Once you’re sure the tieback is
in the perfect location, use your pencil
to mark the spot to install it.
Measure the distance from the
bottom or top of the window to the
tieback to mark the other side and
ensure they’re even.
STEP 2:
Hook installation is an option depend-
ing on desired drapery style. When
using the hook option assemble the
hook through the end of the 11⁄8" pole,
as shown to the left
(A)
.
STEP 3:
Then rotate the hook and 11⁄8" pole un-
til both holes line up as shown to the
left
(B)
.
STEP 4:
To install the mount screw, place it
through the center of the 11/2" pole &
the
optional
hook, as shown to the left
(C)
.
HOOK
MOUNT SCREW
A
B
C
X
