13
14
smithandnoble.com
800.248.8888
When the jog function is activated, tapping the
UP or DOWN buttons for less than 2 seconds
will move the shade is short ‘jogs’ while
holding the UP or DOWN button for longer
than 2 seconds before releasing will operate
the shade at normal speed to it set limits.
When the jog function is de-activated, the
shade will operate at normal speed to its set
limits when the UP or DOWN buttons are
pressed and released.
To Activate Jog Function
Press and hold the UP and DOWN buttons
simultaneously for 5 seconds until the shade
jogs once. Press and hold the STOP button
until the shade jogs once and sounds a long
beep. The shade is now in jog mode.
To De-Activate Jog Function
Press and hold the UP and DOWN buttons
simultaneously for 5 seconds until the shade
jogs once. Press and hold the STOP button
until the shade jogs twice and sounds 3 beeps.
The shade is now in running mode.
Resetting to Factory Mode
Reset to Factory Mode:
Press and hold SETTING button on the motor
for 14 seconds until the motor jogs 4 times.
Release button and the shade will beep 4
times. The motor has been reset to factory
mode. All settings have been cleared.
NOTE:
Once in factory mode, the motor will
go to sleep. The motor must be taken out of
sleep mode to operate and reset limits. Press
the SETTING button on the motor for 2
seconds to wake up. Once the motor is out of
sleep mode, it can be paired to controller and
limits can be set.
ADJUSTING THE JOG FUNCTION/RESETTING TO FACTORY MODE
CR2450
LITHIUM BATTERY
3V
P2
M
P2
REMOTE BACK
P2 BUTTON
SETTING BUTTON
(P1)
LED LIGHT
CHARGING PORT
SHADE MOTOR
CHANNEL
DISPLAY
UP
STOP/
FAVORITES
DOWN
CHANNEL UP
CHANNEL DOWN
REMOTE FRONT
ADD OR REMOVE REMOTE OR CHANNEL
Add or Removing a Shade from a
Channel
Select the channel that you would like to
remove the shade from.
Press and hold the SETTING (P1) button on
the motor until the shade jogs once and sound
a long beep.
Press and hold the STOP button on the remote
for 2 seconds. The shade will jog twice and
sound 3 beeps.
The shade has been added or removed from
the selected channel.
CR2450
LITHIUM BATTERY
3V
P2
M
P2
REMOTE BACK
P2 BUTTON
CHANNEL
DISPLAY
UP
STOP/
FAVORITES
DOWN
CHANNEL UP
CHANNEL DOWN
REMOTE FRONT
SETTING BUTTON
(P1)
LED LIGHT
CHARGING PORT
SHADE MOTOR
