4
Installation instructions for built in application
BEV88
–
80 Can Beverage Cooler
Step 3. Using a Philips head
screwdriver, push on the screw at
the top of the door to make sure it’s
protruding through the hole as far
as possible and screw in to the
appropriate hole on the handle. Do
not fully tighten the screw into the
handle at this point as it will make
attaching the lower portion of the
handle difficult. Once the upper
screw is screwed into the handle,
screw the bottom portion into the
handle. Tighten top and bottom
screws so that they are both snug and
handle is firmly affixed to the
door. Do not over torque the
screws.