FLXMOD CPC 04XX series
Installation, use and maintenance manual - EN
Ver. 1.02
22
6.4 USB port
The USB connector is located on the underside of the module. The type of connector used is the most common
type: type A USB 3.0. The USB 3.0 port is compatible with the USB 2.0 standard.
6.5 Ethernet port
Depending on the model, there are one or two 10/100/1000 Mbps Ethernet ports located at the bottom of the
device that use standard RJ45 Ethernet connectors. It is therefore possible to use common Ethernet cables to
connect the CPX 04XX module to the local network.
6.5.1 Model CPC 0401
Use an adequately sized wire, according to the current flowing. A lower cross-section might
cause fire, due to overheating caused by the wire.
In order to meet the requirements of the EMC 2014/30/UE, the cable must not be longer
than 30 meters.
The CPC 04XX module is a high-tech electronic device, sensitive to electrostatic discharges
(ESD). Take maximum care to prevent such discharges, by adhering to the prescriptions of
the law, in order to avoid damages to the device.
S
A
ETH
