11
INSTALLATION
3.1.2
Seat Height
•
To adjust the seat height,
reposition the leg outriggers
(Ref.
7 of Figure 3)
using the tool
provided for this purpose.
•
There are 2 screws per leg
(Ref. 8
of Figure 3).
•
Ensure all leg outriggers are set
to the same height.
•
Ensure the screws are re-inserted
and tightened when the desired
height is achieved.
•
Check the chair for stability on a
level surface before use.
3.1.3
Armrest Height
To adjust the height of the armrest
•
Loosen handwheels
(Ref. 9 of
Figure 4).
•
Slide armrest to desired position.
•
Tighten handwheels
(Ref. 9 of
Figure 4)
when the armrest is set.
•
Repeat for both armrests –
ensure armrests are set to the
same height on both sides of the
chair.
•
Armrests can be lowered to
minimum setting to facilitate side
transfer of child into the seat.
Note:
Product codes 6911 – 6916
are provided with fixed armrests, and
therefore cannot be adjusted.
Figure 3
Figure 4
7
8
9
