smirthwaite BROOKFIELD HI-LO, Instructions For Use Manual

Page: 24 / 32

22
5.9.3 PELVIC LAP STRAP
The position and length of the pelvic lap strap can be adjusted.
5.9.3.1 POSITION
To alter the position of the CAM locks that hold the lap strap:

Locate the CAM locks (26 & 27) underneath the chair.

Pull the top of the CAM lock so that the head of the fixing screw is exposed.

Hold the nyloc nut that is behind on of the CAM locks (26 & 27) using the supplied
10mm spanner.

Loosen the screw, by turning it anti-clockwise, using the supplied S-key.

Slide the CAM lock to the desired position.

Use the supplied S-key and spanner to tighten the fixing screw which will lock the
CAM lock in position.

Push the top of the CAM lock back down.

Repeat for the other CAM lock.
5.9.3.2 LENGTH

Push the strap ends through the slots in the seat base until they are clearly visible
underneath the chair.

Pull the tops of the CAM locks (26 & 27) so that is perpendicular to the base.

Feed the ends of the straps through the CAM Locks (26 & 27) so that they are at the
desired length.

Push the tops of the CAM locks (26 & 27) so that they are closed.
26
27