T.
944 525 120
+34
www. sminn.com
[email protected]
Pol. Torrelarragoiti, P6 A3 - 1ª
48170 Zamudio Bizkaia
innovative in electronics
CE DECLARATION OF CONFORMITY
The company
ELSON SISTEMAS, S.L
Pol. Torrelarragoiti, P6-A3-1ª
48170 Zamudio - Bizkaia (SPAIN)
Declares
The product:
BASE STATION CONTROLLER BXS-220
Manufactures by
ELSON ELECTRÓNICA, S.A.
Under the trademark:
SMINN
For use in:
Residential, Commercial or light industry
enviroments.
This device meets the provisions contained in the article 3 of the
R&TTE 1999/05/CE Regulation, as long as its usage is compliant to
what was envisaged, having applied the following regulations:
Electromagnetic
EN 301489-1 v1.3.1 (2001-09)
compatibility:
EN 301489-1 v1.3.1 (2001-11)
Low Voltage
EN 60730-1: 2000
2010-03-30 Zamudio
Jose Miguel Blanco Perez
Chief Technical Officer
USAGE RESTRICTIONS
Operation is not guaranteed when installed in different equipment than
the specified one.
THE USAGE INSTRUCTIONS OF THIS DEVICE SHALL BE HANDED TO
THE USER, WHO WILL HAVE THEM IN THEIR POSSESSION. IF THEY ARE
MISLAID, THE USER CAN ASK FOR A COPY OR DOWNLOAD IT
DIRECTLY FROM WWW.SMINN.COM
The manufacturer reserves the right to change the specifications of these
systems as well as this manual without prior warning. The equipment
must be manipulated only by specialized and/or skilled personnel.
WARRANTY
This product has undergone a complete TEST during its manufacturing
process that guarantees its reliability and proper operation. The
manufacturer provides 24 months of warranty to the product from the
date printed in the product and against any anomaly that it may present
in its appearance or operation.Any damage caused by third parties,
natural causes (flooding, fire, lightning, etc), arising from improper
handling or installation, vandalism or any other cause non attributable to
the manufacturer will void the warranty. The warranty only covers repairs
or replacement of the damaged device. E Any expenses derived from
assembling, travelling, transport, natural wear of parts, etc., and, in
general, any expenses that are not part of the repairs or replacement of
the damaged element of the system are excluded. The installer/provider
will ask the manufacturer for a RMA number or authorization for
transport of the system in warranty. Without this previous requisite, the
manufacturer will not be able neither to process nor provide warranty
service.
WARNING
This product must be used in installations which has been conceived for,
considering any other as improper use. The packaging must not be
dumped in the environment. Keep products, packaging, wrapping,
documentation, etc., out of the reach of children. Follow the current local,
national or European regulations. The information contained in this
document may have some mistakes that will be corrected in future
editions. The manufacturer reserves the right to modify the contents of
this document or the product without any prior warning.
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT
(WEEE)
In accordance with the European Directive 2002/96/EC about waste
electrical and electronic equipment (WEEE), the presence of this symbol
(see symbol at the bottom of this text) in the product or in the
packaging, means that this article shall not be disposed in local non-
classified waste streams. It is the user’s responsibility to dispose this
product taking it to a collection point designed for waste recycling of
electrical and electronic devices. The separate collection of this product
helps optimize the waste sorting and recycling of any recyclable material
and also decreases the impact on health and the environment. For more
information about the correct wasting of this product, please contact the
local authority or the distributor where you acquired this product.
ON Led
1.
PROG button
2.
LED RUN (OK)/Relay
3.
BUS terminal block and relay
4.
Buzzer
5.
Fuse
6.
Power terminals
7.
Plug-in memory socket
8.
TECHNICAL CHARACTERISTICS
Power
Depending on model
Energy consumption
< 5 W
Communication
BUS RS485 Half / Duplex
Encryption
High security encryption
Code memorization
Plug-in memory of 250 codes
Memory expansion
500 / 1000 / 2000
Wiring
4-wire (recommended shielded cable CAT5)
Max. capacity of peripherals
2 readers RD 125 + 2 keypads KB 120
Maximum distance
> 200 m
Watertight
Ip54 - (IP66 with cable glands)
Operation temp.
-20ºC - +85º C
Dimensions
100 mm x 130 mm x 50 mm
Casing
ABS
BOX S 220
230 V AC
BOX S 224
12/24 AC/DC
1
2
3
4
5
6
7
8
FUS. 0.3A
BXS-220
Fig. 1
COMPONENTS
SPAIN
