EN
13
3.7.6
Fitting the plinth
The base plinth for kitchen furniture must be removable in the area in front of the washer dryer to allow access for
routine maintenance of the drain pump if it becomes clogged with buttons, fasteners, or similar objects, and for our
engineers to be able to remove the washer dryer for service.
Please note: our engineers will not remove plinths that have been fixed into position by glues or mastics, or where
removal could cause third-party damage.
If a plinth is fitted directly onto the washer dryer then it must be done so with four screws inserted into the four
pre-set holes
Application of the plinth to the furniture must not involve elimination or modification of the washing
machine plinth. Owing to safety reasons, this may not be removed. It must absolutely remain intact and
fixed to the washing machine.
