20 / EN
Washing Machine / User’s Manual
7.8 End Time
With the End Time function, the startup of the programme may be delayed up to 24 hours. After pressing
End Time button, the programme's estimated ending time is displayed. If the End Time is adjusted, End Time
indicator is illuminated.
In order for the End Time function to be activated and the programme to be completed at the end of the
specified time, you must press Start / Pause button after adjusting the time.
If you want to cancel End Time function, press On / Off button to turn off and on the machine.
C
Do not use
liquid detergents when you activate End Time function! There is the risk of staining of the clothes.
1 Open the loading door, place the laundry and put detergent, etc.
2 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
3 Set the end time of your choice by pressing the End Time button. End Time indicator illuminates.
4 Press Start / Pause button. Time countdown starts. “:” sign in the middle of the end time on the display
starts flashing.
C
Additional laundry may be loaded during the End Time countdown period. At the end of the countdown, End Time indicator
turns off, washing cycle starts and the time of the selected programme appears on the display.
When the End Time selection is completed, the time appears on the screen consists of end time plus the duration of the
selected programme.
7.9 Starting the programme
1. Press Start / Pause button to start the programme.
2. Programme follow-up light showing the startup of the programme will turn on.
C
If no programme is started or no key is pressed within 1-10 minute during programme selection process, the machine will
switch to OFF mode. Display and all indicators are turned off.
Selected programme data will be displayed if you press On / Off button.
7.10 Loading door lock
There is a locking system on the loading door of the machine that prevents opening of the door in cases when
the water level is unsuitable.
"Door Locked" LED in the panel turns on when the loading door is locked.
7.11 Changing the selections after the programme has started
After the programme has started you can make the following changes.
7.11.1 Switching the machine to pause mode:
Press the Start/Pause button to switch the machine to pause mode while a programme is running. The light
indicating the Start/Pause status and programme step starts flashing on the Programme Follow-up indicator
to show that the machine has been switched to the pause mode. Also, Loading Door light will also flash until
the door is ready to be opened. When the loading door is ready to be opened loading door light will will turn off
and programme step indicator and Start / Stop LED continue to flash.
Also, when the loading door is ready to be opened, Loading Door light will also turn off in addition to the
programme step light.
7.11.2 Changing the auxiliary function, speed and temperature
Depending on the step the programme has reached, you can cancel or select the auxiliary functions. See,
"Auxiliary function selection".
You can also change the speed and temperature settings. See, "Spin speed selection" and "Temperature
selection".
C
If no change is allowed, the relevant light will flash for 3 times.
