24
The manufacturer's arrangement matches the first specification (that is: 400V, 3-phases, with
neutral); the other can be achieved following the provided wiring diagram. In particular, as for the
upper washing pump (1,5 kW) of the models UW6070D and UW6070DPS, in order to pass to 230
V three-phased, simply interpose the spacing block between the pump connector and the wiring
connector. The spacing block is always supplied with all the models and it is placed near the cables
of the washing pump, fixed with a clamp.
WARNING: While electrically connecting appliances working with 3-phase alternating current,
check the rotating direction of the pump motor.
WARNING: We highly recommend that the appliance is properly earthed.
The manufacturer assumes no liability for damage resulting from not observing this safety rule.
The manufacturer also assumes no liability for damage resulting from faulty electric connection.
USE
PRELIMINARY STEPS
Before starting the appliance, perform the following operations:
Check that the filling and draining hoses supplied with the appliance are connected to the water
mains.
The appliance is provided with a built-in rinse aid dispenser and a built-in a detergent dispenser.
Connect the dispensers to their relevant containers through the intake pipes on the back of the
appliance. The black pipe is for detergent, while the transparent pipe is for rinse aid product. Use
only low-density products; otherwise the dispensers may be obstructed or break.
It is highly
recommended to use industrial chimicals only. Avoid foaming products.
If present, check the right positioning of the detergent probe, because using the dispenser dry can
damage or break the device.
Check the right positioning of the pump intake filters and of the surface filters.
Shut the door and, if it presents, open the external water valve.
