USE - 47
914779640/A
e
ECO
VAPOR CLEAN (on some models only)
Digital programmer
Decrease key
Clock key
Increase key
Setting the time
On the first use, or after a power failure, the
digits
will be flashing on the
appliance’s display.
1. Hold down the clock key
for two
seconds. The dot between the hours and the
minutes flashes.
2. The time can be set via the increase key
and decrease key
. Keep the button
pressed to increase or decrease rapidly.
3. Wait 7 seconds. The dot between the hours
and the minutes stops flashing.
4. The symbol
on the display indicates that
the appliance is ready to start cooking.
Timed cooking
1. Keep the clock key
pressed until the
symbol
appears.
2. Press the clock key
again. On the
display the symbol
and the text
appear, alternating with the
current time.
3. Use the increase
and decrease
keys to set the required minutes of cooking.
4. Select a function and a cooking
temperature.
5. Wait approx. 5 seconds without pressing
any key in order for the function to activate.
The current time and the symbols
and
will appear on the display.
At the end of cooking the heating elements will
be deactivated. On the display, the symbol
turns off, the symbol
flashes and the buzzer
sounds.
6. To turn the buzzer off, simply press one of
the programmer clock keys.
7. Press the clock key
to reset the
programmer clock.
This function is particularly suitable for
cooking on a single shelf with low
energy consumption.
It is recommended for all types of food
except those that may produce a large
amount of moisture (e.g. vegetables).
To obtain maximum energy savings and
reduce cooking times, it is
recommended to place food in the
oven without preheating.
When using the ECO function, avoid
opening the door during cooking.
Cooking (and preheating) times are
longer with the ECO function and may
depend on the amount of food in the
oven.
This function facilitates cleaning using
the steam produced by a small amount
of water poured onto the depression on
the bottom.
If the time is not set, the oven will not
switch on.
To change the time, hold down the
increase key
and decrease key
at the same time for two seconds,
then set the time.
Timed cooking is the function which
allows a cooking operation to be
started and then ended after a specific
length of time set by the user.
It is not possible to set a cooking time of
more than 10 hours.
