27
Instructions for the user
10.3 Removing the internal glass panels
The glass in the door should always be kept thoroughly clean. To facilitate cleaning, it is possible to
remove the door (see 10.2 Removing the door) and place it on a canvas, or open it and lock the hinges in
order to extract the glass panels. The glass panels of the door can be completely removed by following
the instructions provided below.
Warning: before removing the glass panels, make sure that at least one of the door's hinges has been
locked in the open position as described in chapter “10.2 Removing the door”. This operation may have
to be repeated during the glass removal process if the door is accidentally freed.
Removing the internal glass panel:
• Remove the internal glass panel by pulling the rear part gently
upwards, following the movement indicated by the arrows (1).
• Then pull the front of the glass panel upwards (2).
• Doing this detaches the 4 pins attached to the glass from their slots
in the oven door.
Removing the middle glass panels:
• There are two middle glass panels attached using 4 small locks.
Remove the middle panels by lifting them upwards.
Cleaning:
• It is now possible to clean the external glass panel and the panels
removed previously. Use absorbent kitchen roll. In case of stubborn
dirt, wash with a damp sponge and neutral detergent.
Replacing the glass panels:
• Replace the panels in the opposite order to which they were
removed.
• Reposition the internal glass panel, taking care to centre and insert
the 4 pins attached to the glass into their slots in the oven door by
applying slight pressure.