User instructions
15
3.2
Washing programs
Before starting a washing program make sure that:
The water supply tap is
open
.
The softener
container
contains
regenerating salt
.
The
correct amount of detergent
has been added to the
dispenser
.
The baskets have been
correctly loaded
.
The spray arms are able to
rotate freely
and without
obstruction.
The dishwasher door is securely closed.
Warning
:
during the initial phase of the washing program, the operation of sprayers
is not perceived because they start rotating about 5 minutes after the start.
This is the normal operation of the washing cycle.
3.3 Switching on
Press the on/off button to start the dishwasher. Then wait for one of the
program indicator light to turn on.
IMPORTANT
The door of the dishwasher must
ble closed within 4 seconds after use
of the program selection button
for all functions (e.g. program selection,
change, delection, etc.). If the door is not closed within 4 seconds,
one or
more program lights
(depending on the current opertaion)
will flash at
high speed
to indicate that
the operation must be confirmed
before the
door is closed.
To
confirm, simply press the program selection button once
and the
flashes will slow down; close the door an once to start/restart the
dishwasher.
The same applies if the dishwasher is opened
with the program delay
option set and the cycle not started
(e.g. to add more dishes):
the
program selection button must be pressed before the door is closed
,
restarting the program delay countdown.
If the door of the diishwashehas not been closed or has been incorrectly
closed, the washing cycle will not begin.
