User instructions
17
"Flexi Tabs"
The option is optimised for use of detergents which are complete with
salt and rinse aid, known on the market as "3 in 1", "triple action", etc.
With this option activated, any salt and rinse aid If you wish to use
detergents which already contain salt and rinse aid already in the
dishwasher will not be used.
- N.B.:
even with the "
Flexi Tabs"
option selected, the
regenerating salt/rinse aid lights will still stay on if their
containers are empty.
IMPORTANT:
when no longer required, the option must be
disabled
by
pressing the relative
button
(the light goes out).
If the water hardness has been set on a value
above
H3
, and the
“Flexi
Tabs” option
is activated, the relative
light
flashes, warning of a setting
error. 3in1 products are not suitable for use with very "hard" water; this
does not prevent
the use of the option, but the washing results might
not be of the best.
ULTRA CLEAN
The
"ULTRA CLEAN"
program prolongs the final hot rinse to ensure a
further reduction in the bacteria level. If the temperature in the tank falls
during this stage of the program (e.g. because the door is opened or due
to a power blackout), the light of the option and the program lights (
2)
flash
to warn that the additional washing phase has not been completed
successfully. This does not mean that the wash program has been less
effective than usual.
Downloaded from DishWasher-Manual.com Manuals
