Rev 0.0
11
USER INSTRUCTIONS
EN
2.2.8
Switching off
At the end of the program, the dishwasher emits a short beep and the
indica-
tor lights of the fourth and fi fth program
(ref. pr. 4, pr. 5 fi g. 2-04) fl ash.
Turn off the appliance by opening the door and pressing the
on/off button
(ref.
1 fi g. 2-02).
pr. 4
pr. 5
2.3 Additional
functions
2.3.1
Adjusting the water softener
N.B.:
a different washing program from soak must be used to make
the following adjustment.
.
Press and hold down the
program delay
button (ref. 7 fi g. 2-05) until the pre-
set value appears followed by a dot (normally
3.
). Release the button and then
press it again and again until the required value is displayed, as indicated in the
table (see tab. 2-03).
The
6
possible adjustment levels will appear in this sequence:
3., 4., 5., 0., 1., 2..
When the required value appears on the display, release the button; after
5
seconds
the appliance automatically reverts to the program delay and the
adjustment is set to the chosen value.
Fig. 2-04
Summary of Contents for STA4645
Page 3: ...2 Rev 0 0 EN...
Page 19: ...2 Rev 0 0 EN...
Page 49: ...32 Rev 0 0 USER INSTRUCTIONS EN A B A B Fig 5 02 Fig 5 03 Fig 5 04...
Page 56: ...2 Rev 0 0 EN...
