background image

 

 

User instructions 

 

 

 

36

 

 

 
 

 

CLEANING THE FILTER UNIT 

 

 

It is advisable to periodically inspect the centre filter 

and, if 

necessary, to clean it. To remove the filter, grip the tabs, turn them  
anticlockwise and lift upwards; 

 

push the centre filter 

from the underside to remove it from the 

micro-filter: 

 

separate the two parts which make up the plastic filter by pressing 
the body of the filter in the zone shown by the arrows; 

 

remove the centre filter by lifting it upwards. 

 

 

 

 

 

 

 

GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT 
MAINTENANCE: 

 

The filters should be cleaned under running water using a stiff 
brush. 

 

When removing the filter, take care that there are no food residues 
on it. If any residues fall into the washing pit they might block 
hydraulic components, or foul the spray arm nozzles. 

 

It is essential to thoroughly clean the filters according to the 
above instructions: the dishwasher cannot function if the filters are 
clogged. 

 

Carefully replace the filters in their seats, to avoid damaging the 
wash pump. 

 
PROLONGED DISUSE: 

 

Run the soak program twice in succession. 

 

Unplug the power cord from the socket. 

 

Leave the door slightly open,  in order to prevent the formation of 
unpleasant odours inside the washing tank. 

 

Fill the rinse aid dispenser

 

Shut off the water supply tap. 

 

Summary of Contents for ST537












































Reviews: