User instructions
26
CHANGING THE PROGRAM
To change a program while it is running, proceed as follows:
x
press
key
(F)
to set the program in pause status;
x
open the door
and select the new program using key
(B)
;
x
close the door
; the changes relating to the new program will
appear on the
DISPLAY (G)
.
ANNULLING A PROGRAM
x
To annul a program while it is running, it must first be interrupted by
pressing key
(F)
;
x
then open the door
and press key
(B)
in repetition until you obtain
"
Cancel program
";
x
close the door
. "
Draining
" will appear on the
DISPLAY (G)
and the
dishwasher will start to pump out the water. This will be completed
in about 1 minute and "
Program end
" will appear on the
top line of
the display
.
Before the door is closed, a long washing time will appear alongside
"
Draining
".
This is not a malfunction but simply a stage in the time
update process;
the time will be corrected to 1 minute when the door is
closed.
END OF PROGRAM
At the end of the program the buzzer sounds (if enabled), after which the
temperature and program name will alternate with "
Program end
" on the
top line of the DISPLAY (G)
; the
bottom
line continues to show
"
Duration XX min
".
