User instructions
25
CONTENTS OF DISPLAY WHEN PROGRAM IS IN PROGRESS
The
top
line displays the temperature in the tank, alternating (every 4
seconds) with the program being performed and the current program
stage.
The
bottom
line will show the program duration "
Duration XX min
",
where
XX
is the time left before the end of the program, in minutes.
If
DELAYED START (C)
is set, until the program starts the
second
line
shows the message "
Starting in YY hh/mm
", where
YY
are the hours
(from
1-12/1-24
depending on model) or minutes (when less than 1 hour)
left before the program starts.
Any warning messages (e.g. "
No salt
") will appear on the
DISPLAY (G)
during the washing stage, alternating with the time left to the end of the
program.
If the
3/1 PRODUCTS
function (only available on some models) is set,
the no salt and no rinse aid warning messages do not appear.
INTERRUPTING A PROGRAM
To interrupt a program, press the
START/PAUSE
key
(F)
and keep it
pressed until "
In pause
" appears on the
bottom
line of the
DISPLAY (G)
.
To restart the program, repeat this operation until "
Duration XX min
"
reappears on the
bottom line of the display
.
Opening the door
only cuts out the program in progress, but
this is not
recommended
, since water splashes or gusts of steam might escape.
When the door is closed
the program restarts automatically, even it
was interrupted by pressing the
START/PAUSE
key
(F)
.
