background image

Instructions

43

EN

For this appliance

•  Ensure that the appliance is switched off 

before replacing the bulb.

•  Do not rest any weight or sit on the open 

door of the appliance.

•  Take care that no objects are stuck in the 

doors.

1.2 Manufacturer liability

The manufacturer declines all liability for 
damage to persons or property caused by:
•  Use of the appliance other than that 

specified;

•  Non-observance of the user manual 

provisions;

•  Tampering with any part of the 

appliance;

•  Use of non-original spare parts.

1.3 Appliance purpose

•  This appliance is intended for cooking 

food in the home environment. Every 
other use is considered improper.

•  This appliance may be used by children 

aged at least 8 and by persons of 
reduced physical, sensory or mental 
capacity, or lacking in experience in the 
use of electrical appliances, provided 
that they are supervised or instructed by 
adults who are responsible for their safety.

•  The appliance is not designed to 

operate with external timers or with 
remote-control systems.

1.4 Disposal

This appliance must be disposed of 
separately from other waste 
(Directives 2002/95/EC, 2002/

96/EC, 2003/108/EC). The appliance 
does not contain substances in quantities 
sufficient to be considered hazardous to 
health and the environment, in accordance 
with current European directives.
To dispose of the appliance:
•  Cut the power supply cable and remove 

it along with the plug.

•  Deliver the appliance to the appropriate 

recycling centre for electrical and 
electronic equipment waste, or return it to 
the retailer when purchasing an 
equivalent product, on a one for one basis.

Power voltage

Danger of electrocution

•  Disconnect the mains supply.
•  Unplug the appliance.

Summary of Contents for SNLK916MFA9







































Reviews: