Smeg SIH5935B, Instructions For Use Manual

Page: 10 / 13

EN18
IMPORTANT: do not use abrasive sponges or pan scourers. as they could ruin the glass surface.
•
Clean the hob, when it is cool, after each use in order to remove any food residues.
• Sugar and foods with a high sugar content damage the glass ceramic surface and must be immediately removed.
• Salt, sugar and sand can scratch the glass surface.
• Use a soft cloth, absorbent kitchen wipes or a specific hob cleaner (follow the Manufacturer's instructions).
• Read and follow the instructions given in the section “Instructions for use”.
• Connect the hob to the electricity supply and check that the supply has not been shut off.
• Clean the hob and dry it thoroughly.
• If you are unable to turn the hob off after using it, disconnect it from the power supply.
• If, when the hob is switched on, alphanumeric codes appear on the display, consult the following table for instructions.
Before contacting After-sales Service
1. See if you can eliminate the problem on your own by referring to the “Troubleshooting guide”.
2. Turn the hob off and on again to check if the problem has been eliminated.
If after the above checks the fault persists, contact the nearest After-sales Service.
CLEANING
WARNING
- Never use steam cleaners.
- Before cleaning, make sure the cooking zones are switched off and that the residual heat indicator (“H”) is
not displayed.
TROUBLESHOOTING GUIDE
ERROR CODE DESCRIPTION POSSIBLE CAUSES REMEDY
The hob switches off and after 10 seconds
emits an acoustic signal every 30 seconds.
Continuous pressure on control panel
area. Water or utensils on control panel. Clean the control panel.
C81, C82, C83 The control panel switches off because
of excessively high temperatures. The internal temperature of electronic
parts is too high. Wait for the hob to cool down
before using it again.
F42 or F43 The connection voltage is wrong. The sensor detects a discrepancy
between the appliance voltage and that
of the mains supply. Disconnect the hob from the mains
and check the electrical connection.
F12, F21, F25, F36, F37, F40, F47, F56,
F58,
F60, F61, F62, F63, F64
Call the After-sales Service and specify the error code.
AFTER-SALES SERVICE