40
Instructions for the user
5.11 Heating accelerator function
This function can be used to reach the selected heating level more quickly.
The cooking zones will start at maximum power. Once the selected power level is reached, power is
reduced.
To activate this function after having reached the maximum power level
, press key
.
will
appear on the display to indicate that the heating accelerator is active. Then the display will alternatively
show the power level
and
. Using keys
and
you can select the cooking power.
After a given period of time (see table) cooking will continue at the set power level.
After having activated the heating accelerator function if you do not select a power level lower than 9 to
continue cooking, the heating accelerator function will be automatically deactivated after 10 seconds and
cooking will continue at level 9.
If a high power level or the Power function has been selected, the heating accelerator function may
deactivate if the maximum power is exceeded.
Set power level
Quick start cooking
Time (min:sec)
1
0:48
2
2:24
3
3:50
4
5:12
5
6:48
6
2:00
7
2:48
8
3:36
9
-
5.12 Bridge function
Using the bridge function you can use cookware such as fish kettles or rectangular cookware on the
cooking zones connected by the two lines.
The zones will be activated at the same time and will work as if a single zone is being controlled.
5.12.1Activating the bridge function
After having switched on the hob, see “5.3 Switching on and off the hob”, press keys
and
at the
same time.
The top display of the cooking zones will show symbol
. The power level will instead be shown on
the bottom display.
5.12.2Deactivating the bridge function
To deactivate the bridge function you have to press keys
and
at the same time.
When the Bridge function is active you cannot activate the Power function for the same zones.
