Smeg SI 3633, Manual To Installation And Use

Page: 6 / 15

EN
19
1 1 / INSTALLING YOUR APPLIANCE
Separate the 2 phase wires (L1 and L2) before
connection.
NN
ee
uu
ttrr
aa
ll
EE
aa
rrtt
hh
LL
iivv
ee
N N
L L
Green/yellow
Blue
Black-grey
Brown
N Ne eu uttrra all E Ea arrtth h L Liiv ve e
N N
L L1 1 L
L2 2
Blue
Green/yellow
Black-grey
Brown
•Hook-up of 220-240V
~
Warning
If the cable is damaged it must be
replaced by the manufacturer, its after-
sales service or a person with a similar
qualification to prevent danger.
For a 400 V 2N triphase connection, if your
hob malfunctions, check that the neutral
conductor is properly connected.
These hobs must be connected to the mains
using a socket in compliance with publication
IEC 60083 or an all-pole circuit-breaker device in
compliance with the installation rules in force.
Your appliance should be positioned so that
the mains switch is accessible.
When power is first supplied to your hob, or
after an extended power cut, an indicator light
will appear on the control panel. Wait for
30 seconds approximately until this informa-
tion disappears before using your hob (This
display is normal and it is intended, if applica-
ble, for your after-sales service. In all cases,
the user of the hob should disregard it).
CONNECTION • • •Hook-up of 400V 2N
~
-
16A
32A
Separate the wires before connection.
N Ne eu uttrra all
E Ea arrtth h
L Liiv ve e
N N1 1 L L1 1 L L2 2
Blue
Green/yellow
Black-grey
Brown
•Hook-up of 2x230V 2L+2N
~
- 16A
N N2 2
•Hook-up of 400V 3
~
- 16A