Smeg SI 3633, Manual To Installation And Use

Page: 11 / 15

EN
24
SAFETY MEASURES DURING
OPERATION
•Residual heat
After intensive use, the cooking zone that you
have just used can remain hot for several min-
utes.
An “
H H H H” is displayed during this period.
Avoid touching the hot areas during this time.
•Temperature limiter
Each cooking zone is equipped with a safety
sensor that constantly monitors the tempera-
ture of the bottom of the cookware. In the
event that an empty vessel is left on a cook-
ing zone that is on, this sensor automatically
adjusts the power output of the hob, thereby
avoiding any risk of damage to the cookware
or the hob.
•“Small Items” safety
A small object (such as a fork, a spoon, a
ring, etc.) left alone on the hob is not detect-
ed as a piece of cookware.
The display flashes and no heat is produced.
Warning
Several small objects together on a
cooking zone may be detected as cook-
ware.
If the display remains on: power may be
supplied and the objects may be heated.
•Protection against spills
The hob may shut down (with
the adjacent symbol in the
display) and a beep (depend-
ing on the model) may sound
in any of these 3 situations:
-- Overflow that spills onto the
buttons.
-- Damp cloth placed over the buttons.
-- Metallic object placed on the buttons.
Clean the hob or remove the object, then
begin cooking again.
•Auto-Stop system
If you forget to turn off a preparation, your
cooking hob has an ““A
Au utto o--S Stto op p s sy ys stte em m”” safe-
ty function which automatically turns off the
forgotten cooking zone after a predefined
time (between 1 and 10 hours, depending on
the power used).
If this safety function is activated, the discon-
nection of the cooking zone is signalled by
the display “A
AS S” or “A A” in the control zone and
a beep is emitted for approximately 2 minutes.
Simply press any of the buttons to stop it.
A double beep will confirm your action.
BEEP
..BEEP
• •
2 2 // USING YOUR APPLIANCE