EN
3
3
SAFETY INFORMATION
For your safety and correct operation of the appliance, read this manual
carefully before installation and use. Always keep these instructions
with the appliance even if you move or sell it. Users must fully know the
operation and safety features of the appliance.
The wire connection has to be done by specialized technician.
•
The manufacturer will not be held liable for any damages resulting from
incorrect or improper installation.
•
The minimum safety distance between the cooker top and the extractor
hood is 650 mm (some models can be installed at a lower height,
please refer to the paragraphs on working dimensions and installation).
•
If the instructions for installation of the gas hob specify a greater
distance, this must be respected.
•
Check that the mains voltage corresponds to that indicated on the
rating plate fixed to the inside of the hood.
•
Means for disconnection must be incorporated in the fixed wiring in
accordance with the wiring rules.
•
For Class I appliances, check that the domestic power supply
guarantees adequate earthing.
•
Connect the extractor to the exhaust flue through a pipe of minimum
diameter 120 mm. The route of the flue must be as short as possible.
•
Regulations concerning the discharge of air have to be fulfilled.
•
Do not connect the extractor hood to exhaust ducts carrying
combustion fumes (boilers, fireplaces, etc.).
Summary of Contents for SHI410N1
Page 1: ...Instructions Manual SHI410X1 SHI410N1 ...
Page 15: ......
