Instructions for the user
67
9. EXTRAORDINARY MAINTENANCE
The oven requires periodic minor maintenance or replacement of parts subject
to wear, such as gaskets, light bulbs, etc. Specific instructions for each operation
of this kind are given below.
Before any intervention that requires access to live parts, disconnect the
appliance from the power supply.
9.1
Replacing the light bulb
If a light bulb needs to be replaced because it is worn or burnt out (in
multifunction models remove the guide frames; see “8.5.1 Removing the guide
frames (on some models only)”).
Remove the bulb cover using a tool (e.g. a screwdriver).
Remove the bulb by sliding it out as
shown.
On some models only:
the bulbs are
halogen bulbs, so
do not touch them
directly with your fingers,
wrap them
in insulating material.
Replace the bulb with one of the same
type (25W). Replace the cover
correctly, so that the moulded part of
the glass is facing the door.
Press the cover down as far as it will go so that it attaches completely to the bulb
support.