Instructions for the User
48
7. DESCRIPTION OF FRONT PANEL CONTROLS
All the control and monitoring devices are clearly in view on the front panel. The table below provides the
key to the symbols used.
OVEN THERMOSTAT
FRONT LEFT-HAND COOKING ZONE
FUNCTION SELECTOR KNOB
REAR LEFT-HAND COOKING ZONE
REAR RIGHT-HAND COOKING ZONE
FRONT RIGHT-HAND COOKING ZONE
Before using the oven, check that the display is showing the symbol (see point “11. ELECTRONIC
PROGRAMMER”).
HOB CONTROL KNOBS
Standard heating
The ring beside each knob identifies the corresponding cooking zone. To switch
it on, push and turn the knob to the desired setting. Setting is on a gradual
scale, so all the intermediate positions between the numbers can be used.
To switch off the zone, return the knob to the setting
Dual heating
The ring beside each knob identifies the corresponding
cooking zone. To heat the inner cooking zone, push and turn
the knob to the desired setting. To heat both cooking zones
(inner and outer) simultaneously, turn the knob to /
and
then release it. The knob will return to the maximum setting.
To regulate the heating level, turn the knob anti-clockwise to
the setting required. To return to heating of the inner cooking
zone, turn the knob to and then turn it to the required
setting. To switch off the zone, return the knob to
THERMOSTAT KNOB
The cooking temperature is selected by turning the knob clockwise to the
required setting, between
50
° and
275
°C.
The light comes on to indicate that the oven is heating up. This light goes out
when the set temperature is reached. Flashes at regular intervals to indicate
that the temperature inside the oven is being kept constantly at the set level.
