Smeg SC709XSA, Manual

Page: 12 / 30

44
Instructions for the user
• Wait for about 5 seconds to start the function;
• The display shows the current time, the symbol appears between
digits 11 and 12 and the minutes left to the end of the cooking time are
represented by the flashing inside segments (each inside segment
means 12 minutes);
• Press to display the remaining time;
• At the end of the cooking time, the timer will switch the oven heating
elements off, the buzzer will start to sound. The numbers on the dial will
start to flash.
Warning: it is not possible to set cooking durations of more than 12 hours.
The set programming can be reset by pressing and holding key for 2
seconds. By doing this the set duration will be cancelled and the oven must
be turned off manually if a cooking operation is in progress.
3.2.4 End of cooking
As well as setting a cooking duration, this function also allows to set the
end of cooking time (with a maximum delay of 12 hours in relation to the
current time).
To set the end of cooking time, proceed as follows:
• Turn the oven thermostat knob to the required temperature
• Turn the oven function knob to the required function
• Set the cooking duration as described in the previous point “Cooking
duration”;
• Press within 5 seconds to access the end of cooking settings;
• The current time will appear on the display with the internal segments
illuminated to show the end of cooking time. Symbol flashes
between digits 10 and 11;
• Press the value modification keys or within 5 seconds to
increase or decrease the setting by one minute for each pressure until
setting the required end of cooking time;