EN
6
6
INSTALLATION
Wall drilling and bracket fixing for Optional Chimney Telescopic
1200 mm
11a
406
7.2.1 11
12a
313,5
7.2.1
X
313,5
1÷ 2
833 - 1138
Wall marking:
• Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the
center of the area in which the hood will be installed.
• Draw a horizontal line at
1200
mm above the hob.
• Place bracket
7.2.1
on the wall as shown about 1-2 mm from the ceiling or upper limit (see
the picture).
• Mark the wall at the centers of the holes in the bracket.
• Place bracket
7.2.1
on the wall as shown at X” below the first bracket (X = height of the up-
per chimney section supplied).
• Mark the wall at the centers of the holes in the bracket.
• Drill ø 8mm holes at all the center points marked.
• Insert the wall plugs
11
in the holes.
• Mark a reference point as indicated at (833 mm for 36” model or 1138 mm for 48” model)
from the vertical reference line and 406 mm above the horizontal reference line.
• Repeat this operation on the other side.
• Drill ø 12 mm holes at all the center points marked.
• Insert the wall plugs
11a
in the holes and screw into place.
• Fix the brackets using the
12a
screws supplied.
Summary of Contents for SBQ36X
Page 1: ...Instructions Manual SBQ36X SBQ48X 1 ...
Page 4: ...EN 4 4 DIMENSIONS and MAIN PARTS ...
Page 12: ...436006008_05 140902 ...