background image

2 / EN

Washing Machine / User’s Manual

1  Important instructions for safety and 

environment

This section contains safety instructions that will help protect 

from risk of personal injury or property damage. Failure to 

follow these instructions shall void any warranty.

1.1 General safety

•  This product can be used by children at and above 8 

years old and by persons whose physical, sensory or 

mental capabilities were not fully developed or who 

lack experience and knowledge provided that they are 

supervised or trained on the safe usage of the product 

and the risks it brings out. Children must not play with 

the product. Cleaning and maintenance works should not 

be performed by children unless they are supervised by 

someone.

•  Never place the product on a carpet-covered floor. 

Otherwise, lack of airflow beneath the machine will cause 

electrical parts to overheat. This will cause problems with 

your product.

•  If the product has a failure, it should not be operated 

unless it is repaired by the Authorized Service Agent. 

There is the risk of electric shock!

•  This product is designed to resume operating in the event 

of powering on after a power interruption. If you wish to 

cancel the programme, see "Cancelling the programme" 

section.

•  Connect the product to a grounded outlet protected 

by a 16 A fuse. Do not neglect to have the grounding 

installation made by a qualified electrician. Our company 

shall not be liable for any damages that will arise when 

the product is used without grounding in accordance with 

the local regulations.

•  The water supply and draining hoses must be securely 

fastened and remain undamaged. Otherwise, there is the 

risk of water leakage.

•  Never open the loading door or remove the filter while 

there is still water in the drum. Otherwise, risk of flooding 

and injury from hot water will occur.

•  Do not force open the locked loading door. The loading 

door will be ready to open just a few minutes after the 

washing cycle comes to an end. In case of forcing the 

loading door to open, the door and the lock mechanism 

may get damaged.

•  Unplug the product when not in use.

•  Never wash the product by spreading or pouring water 

onto it! There is the risk of electric shock!

•  Never touch the plug with wet hands! Never unplug by 

pulling on the cable, always pull out by grabbing the plug.

•  Use detergents, softeners and supplements suitable for 

automatic washing machines only.

•  Follow the instructions on the textile tags and on the 

detergent package.

•  The product must be unplugged during installation, 

maintenance, cleaning and repairing procedures.

•  Always have the installation and repairing procedures 

carried out by the 

Authorized Service Agent

Manufacturer shall not be held liable for damages that 

may arise from procedures carried out by unauthorized 

persons.

•  If the power cable is damaged, it must be replaced by the 

manufacturer, after sales service or a similarly qualified 

person (preferably an electrician) or someone designated 

by the importer in order to avoid possible risks.

1.2 Intended use

•  This product has been designed for domestic use. It is not 

suitable for commercial use and it must not be used out 

of its intended use.

•  The product must only be used for washing and rinsing of 

laundry that are marked accordingly.

•  The manufacturer waives any responsibility arisen from 

incorrect usage or transportation.

1.3 Children's safety

•  Packaging materials are dangerous to children. Keep 

packaging materials in a safe place away from reach of 

the children.

•  Electrical products are dangerous for the children. Keep 

children away from the product when it is in use. Do not 

let them to tamper with the product. Use child lock to 

prevent children from intervening with the product. 

•  Do not forget to close the loading door when leaving the 

room where the product is located.

•  Store all detergents and additives in a safe place away 

from the reach of the children by closing the cover of the 

detergent container or sealing the detergent package.

1.4 Package information

•  Packaging materials of the product are manufactured 

from recyclable materials in accordance with our 

National Environment Regulations. Do not dispose of the 

packaging materials together with the domestic or other 

wastes. Take them to the packaging material collection 

points designated by the local authorities.

1.5 Disposing of the waste product

•  This product has been manufactured with high quality 

parts and materials which can be reused and are suitable 

for recycling. Therefore, do not dispose the product with 

normal domestic waste at the end of its service life. Take 

it to a collection point for the recycling of electrical and 

electronic equipment. Please consult your local authorities 

to learn the nearest collection point. Help protect the 

environment and natural resources by recycling used 

products. For children's safety, cut the power cable and 

break the locking mechanism of the loading door so that 

it will be non-functional before disposing of the product.

1.6 Compliance with WEEE Directive

  This product complies with EU WEEE Directive 

(2012/19/EU).  This product bears a 

classification symbol for waste electrical and 

electronic equipment (WEEE).

This product has been manufactured with 

high quality parts and materials which can 

be reused and are suitable for recycling. Do 

not dispose of the waste product with normal domestic 

and other wastes at the end of its service life. Take it to the 

collection center for the recycling of electrical and electronic 

equipment. Please consult your local authorities to learn 

about these collection centers.

Summary of Contents for SAW 816





















Reviews: